run live cd g.b.l

Wikis > wiki > gobangos-wiki > run live cd g.b.l

If you have a first contact with the live CD and need help please read tem start guide.
It shows the three ways to start:

At the beginning of what is Live CD
Start the computer from a CD or USB flash drive
Creating a bootable flash drive with the ability to save the settings
Booting ISO in the virtual machine


Setting the startup of the machine

Please refer to the user manual of your machine “PC or Laptop”.
Will be important ways to boot the machine from the media “CD or USB”
Most computers have the ability to quickly select media for booting. This happens when pressing the power button and selecting the appropriate kawisza, which displays a list of boot options. This is usually one of the function keys “F..”
If your machine does not have this function, set the boot method in the BIOS.
How to enter the BIOS setup can be found in the device manual.
In the BIOS, the boot section, specify – Which media will be used as the first to launch.
If the machine will start from the CD or USB and display the boot selection screen. Please select the first option from the list.
If you need to change or re-login session. It will need a user name and password.
You will then be prompted to enter:
– Username “gobang”
– Password “leave blank and press Enter”

Creating a bootable flash drive with the ability to save the settings

Go to the site: http://unetbootin.sourceforge.net/
And follow the instructions.
UNetbootin allows you to create a bootable pendriwe to write the system settings. To do this, prepare stick “4GB, 8GB”, in the program window UNetbootin in “Space used to preserve files across reboots” specify the amount of space that will be used to preserve your system setup and software installation.
When you create a bootable flash drive, follow the instructions above.

Booting ISO in the virtual machine

Go to the page: https://www.virtualbox.org/
Download VirtualBox.
Please read the documentation on this page.
https://wbootww.virtualbox.org/manual/UserManual.html

After starting the virtual machine and display the boot selection screen. Please select the first option from the list.
If you need to change or re-login session. It will need a user name and password.
You will then be prompted to enter:
– Username “gobang”
– Password “leave blank and press Enter”

If you want to install GoBang in a virtual machine, do the following:
Open Terminal and type [ubiquity] Follow the installation guide.
After installation, the system reboots,
IMPORTANT! Before logging set language.

Category: Tags: